ClickCease
Orginal Wooden Windows LTD white logo
Quick Quote Form

For free advice or a free quotation, please call 01753 651 084 or fill in the form below.







    Back to top

    Add an extra room

    The right orangery or conservatory will give your home an additional room and a space that can be used for a multitude of activities.Whether you choose an orangery with a solid roof or a conservatory with a glass room, you are only limited by your imagination!

    Every orangery and conservatory is made-to-measure, so it doesn’t matter what shape your home is our talented design team will find a way to create a stunning addition to your home.

    You can have an orangery that is a separate room in its own right or extend your existing area, such as a kitchen to give you a lighter, brighter and larger space.

    Here are some projects that
    we take real pride in

    With bespoke wooden frames and sealed, double-glazed windows you can relax and enjoy your new area. If you want to install radiators you can do that and be confident that the double-glazing will retain the heat.

    You may require planning permission for additions to your home’s footprint. We can advise you on this during your initial consultation.

    How We Make
    Our Windows

    Planning

    Phase one

    Forming a flat and straight face and edge onto the sawn timbers.

    Thicknessing

    Phase two

    Bringing timbers to correct width and thickness.

    Setting out

    Phase three

    Marking the positions of any mortice and tenon joints.

    Morticing

    Phase four

    Creation a hole cut out to form part of the mortice and tenon joint.

    Tenoning

    Phase five

    Forming scribed shoulders to fit over the moulding and a tenon to fit into the mortice.

    Spindle moulding

    Phase six

    Creating the glass rebate and required moulding along all lengths of the timbers.

    Hornch

    Phase seven

    The final part of the mortice and tenon joint is the hornch which will give more strength to the joint.

    Assembly

    Phase eight

    Glue and cramps are applied to hold the casement tight, flat and square while wedges are hammered into position to lock the joint in place.

    Shooting in

    Phase nine

    At this stage we shoot in the casements to fit there frames and cut out for required locks and hinges.

    Sanding

    Phase ten

    We prepare the casements by doing any fine filling that is required followed by sanding with 80 and then 120 pads, and we finish by knocking off all edges using nibbing pads. Lastly we apply an end grain sealant to all end grain that is showing.

    Painting

    Phase eleven

    4 coats are applied with a fine fill and de-nib between each coat.

    Glazing

    Phase twelve 

    Double glazed units are installed into the casement rebates and are beaded in place. At this point we apply any Georgian bar detail followed by a silicone seal all round the glass.

    Fitting up

    Phase thirteen

    We re-fit all the hinges and locks and hang up the casements to check they are in good working order. After this we apply the rubber gaskets to ensure a good weather seal.

    Quality control

    Phase fourteen

    After all the work is complete we have a team that inspects and checks the operation and finish of the window and only once they are satisfied is the window ok to leave the factory.

    Found what you are looking for?
    Get in touch today for a free quotation.